VarTech Systems VT084WXGA User's Guide download pdf (Page 7)

8.4’ DiamondVue User Guide 150.028

2.6

Signal Connections Cont.

You can use an HD-15 connector cable or a BNC adapter cable to connect the flat panel

monitor to the host computer. The HD-15 video cable (supplied in the kit) you use with this

monitor is equipped with a conventional HD-15 connector at each end.

Note: The following figure is the view looking into the pin end of the male connector or solder

term end of the female connector.

HD-15 Video Connector

The following table provides the pin numbers and corresponding pin

assignments for the HD-15 video connector.

Pin assignments for the HD15 video connector

Pin Connection Pin Connection

1 Red Video 9 No Connection

2 Green Video 10 Sync Ground

3 Blue Video 11 No Connection

4 No Connection 12 Bi-Directional Data

5 Return 13 Horizontal Sync

6 Red Video Ground 14 Vertical Sync

7 Green Video Ground 15 DDC Clock

8 Blue Video Ground

Pin assignment for 9 Pin Optional Touch Screen Connector.

1 DCD Data Carrier Detect

2 RD (Rx) Receive Data

3 SD (Tx) Transmit Data

4 DTR Data Terminal Ready

5 SB Signal Ground

6 DSR Data Set Ready

7 RTS Request to Send

8 CTS Clear to Send

9 NC No Connection

HD15 Connector

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

No comments

VarTech Systems VT084WXGA User's Guide Page 7